← Back to Blog

Matching Krones Spare Parts by Number: Suffixes and Traps

Maintenance Guides · 8 min read · 2026-11-05

A part number is a starting point, not proof

The line is stopped, the number on the old part is partly worn, and three suppliers return three different seals. This is where a fast order becomes an expensive mistake. A number can be superseded, incomplete, tied to a material variant, or read from the wrong position in the machine. For a Krones part request, send the number with the machine context. A supplier can then check whether the number belongs to the right assembly, whether a newer number replaces it, and whether the replacement must match a material or hardness requirement. The aim is a confirmed compatible replacement, not a part that merely looks similar.

Why a number alone creates rework

Part numbers often combine a family or category reference with a variant, revision or suffix. The exact coding system can change across machine generations, so do not guess what each character means from a single example. Instead, identify which fields are visible, which are missing, and how they relate to the position number and machine plate. A good RFQ answers four questions: where is the part installed, what does the machine identify it as, what does the old part show, and what material or service condition must it survive? Photos and records solve different ambiguities. Send them together before the order is urgent.

1. Check the fields that suppliers actually need

Start with the full marking exactly as it appears, including spaces, dots, hyphens and suffixes. Do not shorten a number because one segment looks like a batch code. Note whether the marking is engraved, stamped, printed or on a label. A partial marking can still help, but it must be identified as partial. Next, record the machine model or series, the assembly position and the part description used by the site. “Seal” is not enough. “Seal at the filling valve stem, head 7” narrows the search. A photo of the installed location can reveal whether the old part belongs to the product path, CIP path, pneumatic actuator or guarding. Check the variant field or suffix if present. It may distinguish dimensions, material, coating, left and right orientation, or a machine revision. Do not invent a numbering rule. Send the complete marking and let the supplier compare it with the assembly context and available documentation.

2. Send five pieces of evidence

Send two photos of the part, taken from different angles with a ruler or scale where size matters. One photo should show the marking and one should show the sealing face, holes, slots or wear pattern. A photo prevents a supplier from treating a flat ring and a shaped seal as the same item. Send the number marked on the part, even if part of it is worn. Write uncertain characters as uncertain and include a close-up. Send the machine nameplate so the machine family and build context can be checked. Send the position number from the spare parts manual or assembly drawing. Finally, send the complete line nameplate if the component may differ by line configuration. Each item resolves a different ambiguity. The part photos show geometry and wear. The marking identifies the old item. The machine plate narrows the machine family. The position number connects the part to the assembly. The line plate can expose a variant installed in a specific configuration. Together, they are faster than a long description written from memory.

3. Treat supersession as a question, not a replacement order

A supersession means an old number may have been replaced by a newer number. It does not automatically mean that every part with the newer number fits every location. Ask for both numbers in the quotation and for the basis of the replacement. The old number preserves the machine history; the new number indicates the current supply route. Look for changes in dimensions, material, coating, hardness, connector, orientation or installation method. If the new item needs a spacer, new fastener or a different adjustment, that is a kit or installation change, not a silent one-for-one swap. Record the date and source of the supersession decision so the next shift does not return to the old number without context. For an aftermarket equivalent, compare the same fit, function and service condition. Do not present it as genuine or official. The useful question is whether the alternative matches the required geometry and material, and whether the supplier can support the identification with photos, measurements or a sample.

4. Material variants can defeat dimension matching

Two seals can have the same inner and outer diameter but behave differently in the machine. Food-contact suitability, elastomer type, hardness, temperature limit, chemical exposure and compression set all matter. A standard seal can swell in a CIP chemical or harden at process temperature. A coating can determine friction and wear. Record the product, temperature, CIP chemicals, concentration if known, and the failure mode. A seal that is cut at one edge suggests alignment or extrusion. A seal that is uniformly hard suggests heat, age or chemical attack. A seal that has a shiny wear band may be running against a rough or scored surface. Only then compare dimensions. “Same size” is not a material approval. Ask for the proposed material and hardness, and retain the old part for a sample comparison. If the part touches product, include the required food-contact expectation in the RFQ. The compatible replacement must be suitable for the actual service, not simply easy to measure.

5. Three routes for a discontinued part

Old stock is the fastest route when the part is correct and traceable. Check storage condition, shelf life for elastomers, packaging damage and whether the old number matches the installed position. Old stock can be useful, but age can matter more than appearance for seals and springs. An aftermarket equivalent is the practical route when geometry and service conditions are known. It can reduce lead time, but the RFQ must include dimensions, material, hardness, coating and quantity. If the part is safety-critical, pressure-bearing or certification-marked, confirm whether an alternative is acceptable before purchase. Reverse measurement is the last route when no usable number or stock exists. Send a clean sample, all relevant dimensions, photos of installation, material clues and the failure context. The result is only as good as the sample. Do not reverse-measure a damaged seal and assume its distorted size is the design size. For an elastomer, copy of the outside dimensions without hardness and compression behavior is likely to fail.

6. Make an RFQ answerable in one working day

Include the quantity, machine model, line model, assembly position, full or partial part number, two photos, target delivery date and the service condition. Add the reason for replacement and whether the line is stopped. If the part is a seal, include product type, temperature and CIP information. If it is a sensor, include the connector, range and supply voltage if available. Say what is known and what is uncertain. A clear note such as “last four characters unreadable” helps the supplier ask one focused question. A vague note such as “urgent Krones part” creates a long loop of clarification. If you need an alternative, ask for a compatible replacement or aftermarket equivalent and request the technical comparison with the quote. For identification support, see Full parts catalogue, Filling machine parts and Automation. If the part belongs to a different subsystem, Conveying parts and Pneumatics are useful starting points.

What to replace, and what to replace at the same time

Part Symptom it causes Replace together with Typical trigger
Filling valve seal Leak or fill drift at one head Inspect stem, seat, guide and spring Wear, hardening, CIP exposure
Guide or bushing Seal wears on one side Seal and stem inspection Side load or scoring
Sensor Common reading offset or missed position Connector and calibration check Drift, damage or wrong range
Blade or cutting part Torn label or film Counterpart, gap and fastener check Edge damage or wrong clearance
Pneumatic actuator seal Slow movement or pressure loss Rod and guide inspection Air leak or contamination

Field checklist

Photograph the part in place before cleaning or removing it. Photograph the marking from close range and write down uncertain characters. Take a second photo with a ruler, caliper or known-size reference. Photograph the machine nameplate and the complete line nameplate. Copy the position number from the spare parts manual or assembly record. Record product, temperature, CIP chemicals and the failure symptom. Separate a supersession question from a material or geometry question. Keep the old part available until the replacement is identified. State quantity, delivery date and whether the line is stopped. Ask for the proposed material, dimensions and whether the offer is a compatible replacement or aftermarket equivalent.

When to stop repairing and reverse-measure

Do not reverse-measure a part merely because the number is inconvenient. First check the machine position, old stock and supersession evidence. Reverse measurement becomes reasonable when the sample is complete, the service condition is known and the risk is acceptable. It is a poor choice for a pressure-bearing casting, a safety component or a part that carries a required certification mark without an approved engineering route. For seals, send an undamaged sample if possible and state the chemical and temperature exposure. For machined parts, identify the surfaces that control alignment, runout, compression and timing. A drawing with twenty dimensions is less useful than a drawing that marks the few dimensions that affect fit and function. If the sample is badly worn, label the measured values as worn dimensions rather than design dimensions.

FAQ

What should I do when the number is worn off?

Send two photos, the machine and line nameplates, the assembly position and the part dimensions. Include the installed location and the symptom. The missing number becomes one ambiguity among several pieces of evidence instead of the only information available.

Can I use a part from a newer machine model?

Only after fit, function, material and installation changes are checked. A newer number may supersede an old one, but it can also belong to a different revision or option. Ask for the relation between the two numbers and keep both in the RFQ and maintenance record.

Are compatible replacement seals safe for food contact?

Safety depends on the proposed material, the actual product path and your site approval process. Ask for the material information and any required food-contact documentation. Do not treat a seal as suitable because its dimensions match. The application, temperature and cleaning chemicals matter.

How long does reverse measurement take?

The time depends on sample quality, the number of controlling dimensions and whether the material must be identified. A clean, complete sample with photos and service data is faster than a worn fragment and a partial number. Ask for an identification review before committing to a production quantity.

Is the part in stock?

Stock changes, so provide the exact position, quantity and required date. If an old number is unavailable, ask for old stock, a compatible replacement and an aftermarket equivalent as separate options. That lets you compare lead time and technical risk without treating different routes as identical. Need a specific part? Send the machine model, the position number and two photos of the part — we quote within one business day. → Send your parts list


All brand names, trademarks and model numbers mentioned are the property of their respective owners and are used for identification and reference purposes only. We supply compatible aftermarket replacement parts and are not an authorized distributor or representative of Krones AG or KHS GmbH.

Need Packaging Equipment?

SPS helps small food manufacturers source reliable packaging equipment at factory prices.

Get a Free Quote →